1353 Handshoe Mouse - Wireless / Ultimate Ergonomic Comfort with BlueRay Track and Light Click!
(Note - Wired version is special order so please call us at 800.759.5060!)
The user friendly HandShoe Mouse is an ergonomic mouse available in 3 standard sizes: Small, Medium and Large.
The HandShoe Mouse is plug and play; no special software drivers for Mac or PC are needed.
Controls consist of 2 buttons at an ergonomic position and a scroll wheel fitted with a switch mechanism.
The large size HandShoe Mouse has a third mouse button.
This mouse button is not programmable; it has the same function as the click function underneath the scroll wheel.
The BlueRay Track version of the HandShoeMouse
You can also order a BlueRay Track (BRT) version of the HandShoe Mouse which will work on almost every surface.
The BRT version works with a higher resolution than the standard: 1000 dpi.
The BRT Light Click (LC) version: has a resolution of 1500 dpi.
Connection USB 1.1 (compatible with USB 1.1 and USB 2.0)
Separate USB connection on the HandShoeMouse
Battery wireless version is charged with USB cable
Control Two buttons at ergonomic position plus scroll wheel
Scroll wheel Fitted with switch (just pushing it performs scroll function too)
Control mechanism standard: optical 800 dpi; BlueRay Track: 1000 dpi
BlueRay Track Light Click (LC): 1500 dpi
Operating systems Windows 95, 98, 2000, NT, XP, Vista and Windows 7 and 8
Mac OS 9 or Mac OS X
Poll rate (Herz) of the electronics is 113~118Hz and up to 120Hz.
Wireless range of the receiver is 10 m
Receiver / dongle of the standard BRT version is fitted with a LED light which goes on and off when operating the mouse.
Receiver / dongle of the BRT Light Click (LC) version is smaller and does't have a light.
The wireless HandShoeMouse uses a rechargeable lithium ion battery which should only be removed by professional service providers.
Operating time for the wireless version is 4-6 weeks.
Charging of the wireless version takes around 3 hours.
When the battery is completely empty, charging may take 6 hours.
Battery life is normally more than 4 years, depending on intensity of use.
After 4 years of use, the battery, may need to be charged more frequently.
Charging takes place by means of the provided USB cable; The PC or laptop needs to be switched on during charging.
One can continue working while charging the battery but the receiver / dongle must be in place for the communication with your computer
How do I install the HandShoe Mouse?
Look at the way in which each connector of your cable is orientated
and line it up with the socket before you attempt to push it in.
Check if the cable is well connected on both sides.
Check if the LED light at the bottom of the mouse is burning.
Check if the cable is in good condition.
If you wiggle the cable just behind the connection with the mouse, the LED light will go on and off in case the cable is damaged.
If the LED light is not burning, contact your supplier.
A. Installation of the Wireless Version of the HandShoe Mouse (not required for Light Click version)
The wireless HandShoe Mouse communicates with your computer by means of an RF signal in combination with a micro antenna. The new Light Click version does not need installation. Just plug the dongle in a free USB port. move your mouse and installation is automatic.