26055 EasyRiser Articulating Arm!
The EasyRiser arm provides a complete system for simple and precise positioning of keyboard height and tilt.
Think of how effortlessly a balloon rises and floats...and you'll understand the flexible, patented EasyRiserTM. Its convenient, knob-free height adjustment allows for infinite positioning within its efficient 6-1/4" travel range. Lift the keyboard tray to the desired height and release; the keyboard automatically locks! The tilt angle is set by a sculpted, one-touch wand that combines function and ergonomic design. Soar comfortably through your workday with the EasyRiser.
Extended arm design fits various workstation configurations, including corners (CornerShaper is needed for 90° corners)
Closed-channel design provides maximum keyboard tray stability for a solid, quality feel
Stylized wand permits easy adjustment through a full 15° negative and 15° positive tilt
"Lift and release" height adjustment is effortless and secure through its 6.25" travel range
360° rear swivel for optimal keyboard tray positioning and easy stowage on its 23" track
Slim profile maximizes knee clearance when in use or retracted
Exceeds the ANSI/BIFMA X5.5, 1998 industry performance standard
Up 1/4" (7 mm)
Down 6" (152 mm)
Total 6 1/4" (159 mm)
Height Set Lift and Release
+/- 15º Tilt Set By Wand
Rear Swivel 360º
Fully Retractable Yes, 23" Track Included
ANSI/BIFMA X5.5-1998 Yes, Exceeds
Finish Textured Black Powder Coat
Standard 23" Glide Track provides retractibility. Non-standard track lengths are available upon request. In the Glide Track, the arm mechanism slides along the length in slots. 23" Ball-Bearing and Roller-Bearing Tracks are also available for smoother stowing and extraction. (The ball-bearing version is slimmer than the roller-bearing version.)
--SEE OPTIONS, FOR MORE DETAIL
Available with all EasyRiserTM tray sets, the articulating arm comes preset at the factory to operate in only the negative-tilt position.
To Order: Place -NTO after the part number on your order.
FRONT SWIVEL OPTION
Optional Front Swivel turns the EasyRiserTM into a DualswivelTM for increased mobility.
All EasyRiserTM tray sets have been designed to facilitate versatility in seated working postures. All tray sets fully retract on the standard 23" GlideTrackTM and shorter track lengths are available for shallow worksurfaces.
It's easy to specify the most advanced ergonomic keyboarding solutions in the industry. To ensure the correct fit, simply verify;
There is an unobstructed area under the worksurface to install the track. A shorter track length may be required for certain installations.
The minimum worksurface depth of 23 1/4" is achieved, so EasyRiserTM tray sets can fully retract.
The location of grommet holes doesn't interfere with track mounting.
NOTE: For 90-degree corners combine any EasyRiserTM tray set with the convenient CornerShaper for the ideal solution.