27226 Cobra Tilt-A-Wheel (Arm Only)
The Cobra Tilt-A-Wheel arm offers innovative one-hand tilt adjustment with maximum flexibility for users in seated or sit-to-stand applications!
Ergonomic research shows that the ability to move easily from a seated to a standing position significantly reduces fatigue and improves circulation. Just like a snake charmer, you can easily make the CobraTM respond to your commands. The stylized Cobra mechanisms put the keyboard and mouse in perfect user position, whether sitting or standing. Our patented designs, trays and mousing options make it easy to choose a keyboarding system that offers maximum flexibility for a personalized ergonomic fit. With this Cobra, your wish is its command!
Soft-touch rotating wheel allows convenient, stable, one-hand tilt adjustment
Offers a tremendous 12.5" of travel (7" above work surface; 5.5" below) to accommodate users in seated or sit-to-stand applications (CornerShaper is needed for 90° corners)
Offers maximum seated flexibility, with a full 20° negative tilt and 10° positive tilt
"Lift and release" height adjustment is effortless and secure
360° rear swivel provides additional keyboard tray positioning and easy stowage on its 23" track
Slim profile maximizes knee clearance when in use or retracted
Exceeds the ANSI/BIFMA X5.5, 1998 industry performance standard
Specifications for Tilt-a-Wheel Cobra
...Up 7" (178 mm)
...Down 5 1/2" (140 mm)
...Total 12 1/2" (318 mm)
Height Set By Lift and Release
+10º/-20º Tilt Set By Soft Touch Wheel
Rear Swivel 360º
Fully Retractable Yes, 23" Track Included
ANSI/BIFMA x5.5 1998 Yes, Exceeds
Finish Textured Black Powder Coat
Available with all Tilt-a-Wheel CobraTM tray sets, a "positive stop pin" can either be factory or field installed so arm operates only in the negative-tilt position.
To Order: Place -NTO after the part number on your order.
Standard 23" Glide Track provides complete retractibility. Non-standard track lengths are available upon request.
23" Roller Track or 23" Ball-Bearing Tracks are also available
--SEE OPTIONS, FOR MORE DETAIL
All CobraTM tray sets have been designed to facilitate a healthy, sit-to-stand working posture in virtually any workspace configuration. All tray sets fully retract on the standard 23" GlideTrackTM and shorter track lengths are available for shallow worksurfaces.
It's easy to specify the most advanced ergonomic keyboarding solutions in the industry. To ensure the correct fit, simply verify;
There is an unobstructed area under the worksurface to install the track. A shorter track length may be required for certain installations.
The minimum worksurface depth of 23 1/4" is available, so CobraTM tray sets can fully retract. The location of grommet holes doesn't interfere with track mounting.
*Please note - Shorter 21" Arm Track length is available, however platform may not fully retract when platform stowed away.