Designed to bring precision and productivity to harsh environments. Tens of thousands in use in military and factory applications all over the world. In most cases, works with drivers supplied with your operating system (no driver support headaches!)
60% less tiring than a wrist and elbow powered mouse.
Integrated hand support reduces the risk of carpal tunnel syndrome.
Click, Double-Click, and Click & Drag without complicated driver setup.
Super strong glass filled Xenoytm thermoplastic case.
Conformal coating on PCB protects against caustic and conductive contamination.
Survived a demonstration drop of 500 feet into a plowed field from an airplane.
Reliable stainless steel shafts and bearings.
"Less than 1% of ITAC's trackballs require warranty service" means less factory downtime.
FCC Class B and CE Mark certified.
RoHS-Compliant units now available.
RoHS-Compliant PS/2 Mouse-Trak Desktop Industrial
PC's with a PS/2 mouse port
Sun Microsystems servers and workstations with a PS/2 mouse port (JavaStation)
DEC servers and workstations with a PS/2 mouse port
IBM RS/6000 and Xstation
Silicon Graphics servers and workstations with a PS/2 mouse port
End User Product Specification
RoHS-Compliant PS/2 MOUSE-TRAK Desktop Industrial Trackball
This specification describes the functional, physical, and environmental characteristics of the PS2 MOUSE-TRAK Desktop Industrial.
2.1 Resolution: 192 to 576 pulses per revolution of the ball.
2.2 Input Switches: Three (3)
2.3 Interface: IBM PS/2
2.4 Connector: 6-Pin Mini-DIN Male
2.5 Pin Assignments: Pin 1 = PS/2 Data
Pin 2 = NC
Pin 3 = Common
Pin 4 = +5V
Pin 5 = PS/2 clock
Pin 6 = NC
2.6 Compatibility: Microsoft PS/2 Mouse Protocol, Logitech PS/2 Mouse Protocol
2.7 OS Compatibility: Microsoft Windows 95, Windows 98, Windows ME, Windows 2000, Windows XP (32-bit and 64-bit), Windows 2003 (32-bit and 64-bit).
Linux distributions which support PS/2 mouse devices.
2.8 Switches: Mechanically limited, break resistant
2.9 Cable: 96"+-0.5"
2.10 Power Consumption: Idle: 8mA
3.1 Dimensions: Approximately 4"wide x 8" long
3.2 Weight: 1.3 lbs.
3.3 Body Material: Glass filled Xenoy thermoplastic, black
3.4 Ball Material: Cast Phenolic Resin
3.5 Ball Hardness: Rockwell H 85
3.6 Tracking Force: 1.5 oz. maximum, 0.5 oz. typical (15g)
3.7 Ball Load: 25 lbs. maximum downward
3.8 Ball Speed: 500 RPM maximum
3.9 Hand Pad: Injection-molded vinyl, black
4.1 Operating Temperature: 0 to +50 degrees Celsius
4.2 Storage Temperature: -20 to +60 degrees Celsius
4.3 Humidity: 0 to 95% non condensing
A dust ring is included for dust-sensitive applications
Included instruction manual
Standard MOUSE-TRAK labeling.
UPC ID and barcode.
Serial Number and Code39 barcode.
Each unit is packaged in an individual, protective container which may display a bar-coded label of the customer's specification
9.0 Special Features:
9.1 Right/Left-handed modes: Yes. See manual for programming instructions
9.2 Programability: Middle Key:
The middle key may be set for the auxiliary function, a primary click-and-drag, or a primary double-click. See manual for programming instructions.
Right (Secondary in right-handed mode) Key:
The right key may be set for either secondary click or secondary click-and-drag. See manual for programming instructions.
Programming will reset to factory default if the MOUSE-TRAK receives a reset signal from the host computer.
10.1 Cable Assembly Drawing: AutoCAD DWG (59K)
PNG Image (25K)
10.2 Unit Assembly Drawing: AutoCAD DWG (73 K)
PNG Image (39 K)
10.3 Panel/Table Mounting Instructions: AutoCAD DWG (56 K)
PNG Image (35 K)
10.4 CE Mark Certification/
EU Declaration of Conformity: Adobe PDF (431 K)
10.5 Certificate of RoHS Compliance: Adobe PDF (70 K)